Calcium Sulfate SDS MSDS of Manufacturers

Anmol Chemicals is a group company. They are the pioneer manufacturers of Calcium Sulfate Dihydrate Hemihydrate Anhydrous, Pharmaceutical Food & Flavor chemicals in India. They have several manufacturing facilities spread across India. The group is exporters to UAE, Europe, Canada & USA etc.

The unit and or associates have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

CAS Number 10101-41-4 Dihydrte 10034-76-1 Hemihydrate 7778-18-9 Anhydrous, Calcium Sulfate Dihydrate Hemihydrate Anhydrous SDS MSDS of Manufacturers

Calcium Sulfate Dihydrate Hemihydrate Anhydrous SDS, Safety Data Sheet MSDS Sheet 24-Jun-22

Product Name & Other Names: Calcium sulfate
CAS #: 7778-18-9 Anhydrous, 10034-76-1 Hemihydrate, 10101-41-4 Dihydrate.
EINECS EC number: 231-900-3
Relevant uses and uses advised against (if any) : Industrial use only.
Supplier: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Calcium sulfate or Calcium sulphate.
CAS #: 7778-18-9 Anhydrous, 10034-76-1 Hemihydrate, 10101-41-4 Dihydrate.
EINECS EC number: 231-900-3

Skin: Wash exposed area with soap and water.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.

Flammability of the Product: Non-flammable.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Remarks on Fire Hazards: Calcium sulphate hemihydrate or anhydrous mixed with phosphorus will ignite at elevated temperatures. When primed at high temperature with potassium nitrate-calcium silicide mixture, calcium sulfate mixed with excess red phosphorus will burn.
When heated to decomposition it emits toxic fumes of oxides of sulfur and calcium.
Special Remarks on Explosion Hazards Many metal oxo-compounds (nitrates, oxides, and particularly sulfates) and sulfides are reduced violently or explosively (undergo a thermite reaction) on heating an intimate mixture with aluminum powder to a suitably high temperature to initiate the reaction. A violent or explosive reaction can occur upon heating when calcium sulfate is mixed with aluminum powder. Containers may explode when heated.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and evacuate as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and acids. Hygroscopic. Avoid moisture.

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Exposure Limits:
TWA: 15 (mg/m3) from OSHA (PEL) [United States] Inhalation Total.
TWA: 5 (mg/m3) from OSHA (PEL) [United States] Inhalation Respirable.
TWA: 10 (mg/m3) from ACGIH (TLV) [United States]
TWA: 10 (mg/m3) [United Kingdom (UK)] Inhalation Total.
TWA: 4 (mg/m3) [United Kingdom (UK)] Inhalation Respirable.3
Consult local authorities for acceptable exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: White solid. Hygroscopic crystals or lumps or powder.
Odor: Odorless.
Odor threshold: Not data found.
pH: Not data found.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: No data found.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: No data found.
Flammability (solid, gas): data found.
Partition coefficient: n-octanol/water: data found.
Solubility(ies): Very slightly soluble in cold water.
Viscosity: Not available.

Stability: Stable under ordinary conditions of use and storage.
Conditions of Instability: Incompatible materials
Incompatibility with various substances: Reactive with oxidizing agents, acids.
Special Remarks on Reactivity: Hygroscopic; keep container tightly closed. Loses waters at 163C. Incompatible with Diazomethane, aluminum, magnesium, phosphorous.
Polymerization: Will not occur.

Toxicity to Animals:
LD50 (Oral) Rat 3,920 mg/kg
LC50: Not available.
Mutagenic Effects: No information available.
Teratogenic Effects: No information available.
Developmental Toxicity: No information available.
Reproductive Effects: No information available.

Ecotoxicity:
EC50 >79 mg/l Daphnia 48 hours
EC50 >790 mg/l Micro-organism 3 hours
Acute LC50 >1970 mg/l Fish 96 hours
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No information available.

Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled for transport.
Sea Transport IMDG/IMO: Not controlled for transport.
Air Transport IATA/ICAO: Not controlled for transport.

USA Regulations:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed.

Calcium Sulfate Dihydrate Hemihydrate Anhydrous BP Ph Eur USP Reagent FCC Food Grade Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264